Basin Drain

Grillage Basin Drain Grillage Basin Drain Stopper Basin DrainBasin Drain are installed during construction at the bottom of the basin or fountain of the architectural water feature for drainage purposes or for the aspiration of the pump unit. Basin drain can have 2”H or 3”H brass grates or a 2” screw cap. Intakes with caps can be used for the assembly of an adjustable overflow to maintain the water level of architectural water features. These can be disassembled when it is necessary to empty the water fountain.

Technical Features

CODE
Type
Ø Thread
F7462001
Grille 2" H
F7463002
Grille 3"H
F7482003
With Plug 2"H
F7482003R06
Plug Replacement 2"M
Download the data sheet in .PDF format

Ball Joints

Free Rotation Ball Joints

Spherical Ball Joints

Adjustable flange type Ball Joints
Ball joints are used to achieve the desired inclination of water jets in an architectural fountains; on occasions the installation of hydraulic components does not achieve the vertical orientation or the angle necessary for the fountain nozzles to operate correctly. Articulated joints correct the outflow angle so that vertical water jets can be achieved or parabolas adjusted.

There are three types of articulated joints:

  • 360º around an axis and 19º crosswise to this axis.
  • A sphere or ball type that allows fountain nozzles to be perfectly adjusted to vertical, or parabolic water jets to be achieved
  • Adjustable flange type. Less volume and weight but less angle of inclination.

Technical Features

CODE
Type
Ø Thread
Angle
F7401036
360º Rotatory 1" MM 360º + 19º
F7401058
Spherical 1" FM 22º
F7401554
Spherical 1½" FM 23º
F7402059
Spherical 2" FM 23º
F7402555
Spherical 2½" FM 20º
F7403051
Spherical 3" FM 20º
F7403411
Adjustable Flange Type 3/4" FM
F7403073
Adjustable Flange Type/td> 3" FM
Download the data sheet in .PDF format

Manifold Support Legs

Manifold Support Legs Manifold Support LegsLegs for supporting the polygon manifolds and jet pipe stock in water fountains. These accessories are used to fix the water manifolds in place without it being necessary to fix them directly over the water intakes. This spreads the load over several points of the manifold or pipe stock and ensures that they are properly horizontal in relation to the ground and the orientation of the fountain nozzles.

Technical Features

CODE
Ø Tubo (mm)
Adjustable
F3200207
35 250 - 450
F3200218
54 250 - 450
Download the data sheet in .PDF format

Adjustable Overflow

Adjustable Overflow Anti Vortex Adjustable Overflow Adjustable OverflowAdjustable Overflows maintain the maximum level of water inside the basin or fountain of the architectural water feature; they can be set to adjust the water to the desired height, which can either be between 30 and 50 cm or 50 and 90 cm. Optional 2” basin drain so that the overflow can be dismantled if the water fountain needs to be emptied.

Technical Features

CODE
Adjustable (cm)
Ø Thread
type
Basin Drain
F7432007
30 - 50 2" M Grille No
F7432018
50 - 90 2" M Grille No
F7432029
30 - 50 2" M Anti vortex No
F7432031
50 - 90 2" M Anti vortex No
F7472002
30 - 50 2" H Grille
F7472013
50 - 90 2" H Grille
F7472024
30 - 50 2" H Anti vortex
F7472035
50 - 90 2" H Anti vortex
F7433008
30 - 50 3" M Grille No
F7433019
50 - 90 3" M Grille No
Download the data sheet in .PDF format

Flow Stabilizers

Flow Stabilizers Flow StabilizersFlow stabilizers are used to smooth out water turbulence caused by the water pump forcing the water through pipes and other components such as elbows and tees, etc. This component is fitted just before the fountain nozzle to ensure that the water running through the nozzle is flowing in the most laminar way possible, leading to a more crystalline jet with greater height performance

Some fountain nozzles are already fitted with their own flow stabilizer, although this is redundant to some extent, as achieving the best possible water flow quality always allows this pre-installed component to behave optimally

Tehcnical Features

CODE
Thread
Material
F7453811
3/8" MM Brass
F7451212
1/2" MM Brass
F7451019
1" MM Brass
F7451515
1½" MM Brass
F7451559
1½" MH Brass + Stainless Steel
F7452055
2" MH Brass + Stainless Steel
Download the data sheet in .PDF format

More Articles...